Six production processes of Melamine tableware!

Six production processes of Melamine tableware!
1. Preheating procedure: use the raw material box to weigh the tableware to be produced, weigh it and put it into the high-profile wave 2. Plain noodle procedure: pour the preheated agglomerated raw material into the mold, start the mechanical plain noodle procedure, and go through high temperature High pressure, curing molding (Compression molding machine is commonly used for compression molding).
3. Applique procedure: The Jinan imitation porcelain tableware manufacturer reminds everyone to cut the decal paper that has been brushed with the gloss powder according to the flower shape, and paste it on the plain-shaped tableware as required. The decal should be pasted upright, and the decal position is moderate, so that people can see Beautiful and generous, the printing process is started after the flower is applied, and the printing needs the second compression molding of the compression molding machine to print the flower paper on the tableware.
4. Gold adding procedure: After the product is pasted, evenly sprinkle light powder on the surface of the product. The light powder should not be sprinkled less, otherwise it will affect the color of the product. Of course, you should not sprinkle more. Then start the machine, after the machine is cured under high temperature and pressure, the surface of the product has the brightness of porcelain.
5. Polishing procedure: After the product is produced, it must be polished and polished, because the produced product has burrs, which is not conducive to the use of people’s lives, and is likely to cause harm to people’s hands and mouths; therefore, polishing and polishing are indispensable. Grinding and polishing can remove the burrs of the product, making the product look more beautiful and smoother.
6. Inspection and packaging procedures: The imitation porcelain tableware manufacturer reminds everyone that the polishing operation has entered the inspection link, and the quality inspection should be strictly controlled. There should be initial inspection and re-inspection to pick out the unqualified products, and then enter the warehouse for packaging.